brackt/app/services/simulations/__tests__/mlb-simulator.test.ts

435 lines
17 KiB
TypeScript
Raw Normal View History

Add MLB playoff simulator with AL/NL division standings, fixes #121 (#225) * Add MLB playoff simulator with AL/NL division standings, fixes #121 - New `mlb-simulator.ts`: 50k Monte Carlo sim drawing division winners (weighted by p_div) and 3 WC teams per league, then simulating WC best-of-3 → DS best-of-5 → LCS best-of-7 → World Series. Elo parity factor 350; blends Vegas odds 30/70 when sourceOdds available. - New `standings-sync/mlb.ts`: adapter for free statsapi.mlb.com API, mapping AL/NL conferences, division ranks, streaks, home/away/L10 splits. - New `mlb-divisions` display mode in RegularSeasonStandings: shows 1 division winner per division section + Wild Card section with 3-spot playoff line, headings read "AL/NL League" instead of "Conference". - Refactored buildNhlSections/buildMlbSections into shared buildDivisionSections (divisionSpots + wcSpots params); conferenceLabel now flows through group objects rather than being derived from displayMode in the render. - DB migration 0062 adds `mlb_bracket` to simulator_type enum. - 37 new tests across simulator, adapter, and component. Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> * Fix flaky tennis simulator test: increase trials and lower threshold 500 trials with a ~3–5% expected win rate had enough variance to occasionally land below the 0.03 threshold (~2% failure rate). Bumping to 2000 trials reduces the std dev by 2x; lowering the threshold to 0.02 keeps the assertion meaningful (still well above random 0.78%) while eliminating the flakiness. Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> --------- Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com>
2026-03-25 08:47:02 -07:00
import { describe, it, expect } from "vitest";
import {
normalizeTeamName,
getTeamData,
winRateFromRDif,
Fix MLB simulator: projected wins drive seeding, perf fix, + surface simulate errors (#65) ## Summary - **MLB simulator seeding now responds to projected wins**: replaced hardcoded FanGraphs `p_div`/`p_wc` probability draws with Binomial regular-season simulation. Admin-entered projected wins (via Elo) now drive both playoff _qualification_ odds and in-bracket game win probability, not just the latter. - **Reads current standings mid-season**: `getRegularSeasonStandings` is called so synced `wins`/`gamesPlayed` feed into each simulation iteration's projected final standings. - **27× seeding performance improvement**: `sampleBinomial` now uses a Box-Muller normal approximation for `n ≥ 30`, dropping the seeding phase from ~243M to ~3M `Math.random()` calls per 50K-sim run (pre-season, 162 remaining games × 30 teams). - **Missing-standings warning**: when standings exist for some teams but not all recognized ones (partial sync), a `logger.warn` now surfaces which teams are falling back to 0 wins / 162 remaining instead of silently distorting seeding. - **Cleanup**: `eloToRDif` calls `rawWinRateFromElo` instead of inlining the same formula. - **Simulate errors surface inline**: moved simulation action from dedicated route to parent page `intent="simulate"` so errors display inline rather than crashing to an error page. ## Test plan - [ ] `npm run test:run -- mlb-simulator` — 49 tests pass - [ ] `npm run typecheck` — clean - [ ] Trigger a simulation from the admin panel for an MLB season with projected wins entered; confirm teams with higher projected wins show meaningfully higher EVs - [ ] Confirm that running simulate with no projected wins entered (pre-season defaults) still produces a valid bracket - [ ] Check logs after simulating a season where some teams lack standings rows — confirm warning appears 🤖 Generated with [Claude Code](https://claude.com/claude-code) Co-authored-by: Chris Parsons <chrisparsons1127@gmail.com> Reviewed-on: https://forge.brackt.com/chrisp/brackt/pulls/65
2026-06-01 20:50:03 +00:00
rawWinRateFromRDif,
rawWinRateFromElo,
rdifWinProbability,
Fix simulator brackets: NHL bracket-aware mode, MLB/NBA/WNBA sourceElo support (#358) * Fix NHL bracket-aware simulation and MLB sourceElo support NHL: NHLSimulator now checks for a populated playoff_game bracket before falling back to season-projection mode. When a bracket exists (e.g. via simple_16 template), it simulates the actual bracket structure, respecting completed matches and using ELO+odds blending for the rest — matching the pattern used by Snooker, NBA, and UCL simulators. MLB: MLBSimulator now reads sourceElo from participantExpectedValues and converts it to an effective RDif (via eloToRDif), overriding the hardcoded TEAMS_DATA.rdif when present. This wires up the expected-wins admin form (which saves sourceElo) to the simulation engine. https://claude.ai/code/session_01139GJVg2gqgDjcUzqhnBNn * Wire sourceElo from projected wins form into NBA, NHL, and WNBA simulators All three simulators had entries in simulator-config.ts (enabling the projected wins form in the admin UI) but silently ignored the sourceElo that was saved. NBA: Both bracket-aware and season-projection modes now load sourceElo and prefer it over hardcoded TEAMS_DATA elo. Added resolvedElo field to TeamEntry so eloOfEntry() uses the correct value throughout. NHL: Season-projection mode now fetches sourceElo + sourceOdds in a single parallel query (removing the duplicate evRows query). Bracket-aware mode also loads sourceElo alongside sourceOdds. Both modes use sourceElo > TEAMS_DATA > 1400. WNBA: resolveElo() now accepts sourceElo as an optional highest-priority argument. The evRows query fetches sourceElo alongside sourceOdds and passes it through when building team entries. https://claude.ai/code/session_01139GJVg2gqgDjcUzqhnBNn * Add review fixes: NHL R1 validation, WNBA sourceElo tests, NHL bracket unit tests - NHLSimulator.simulateBracket: remove unused nameById variable - NHLSimulator.simulateBracket: validate all R1 participants before entering Monte Carlo loop; throws with a clear message if any slot is missing - wnba-simulator.test.ts: add 5 tests covering the sourceElo override parameter on resolveElo() (overrides SRS, overrides futures, overrides fallback, null/undefined fall through to normal priority chain) - nhl-simulator.test.ts: add full bracket-aware integration suite (10 tests) covering fallback to season-projection, structure validation errors, probability distributions, fully-decided champion, and source tag https://claude.ai/code/session_01139GJVg2gqgDjcUzqhnBNn * Fix TS error: add resolvedElo to makeEntry in nhl-simulator.test.ts TeamEntry requires resolvedElo after the simulator refactor. https://claude.ai/code/session_01139GJVg2gqgDjcUzqhnBNn * Fix lint: replace non-null assertions with null-safe alternatives in NHL test https://claude.ai/code/session_01139GJVg2gqgDjcUzqhnBNn --------- Co-authored-by: Claude <noreply@anthropic.com>
2026-04-30 08:33:57 -07:00
eloToRDif,
Make MLB projected wins actually drive the simulation Entering projected wins for an in-progress MLB season did not behave as expected: the entered numbers came back changed, and the simulation appeared to ignore them in favour of whatever Elo was already stored. Four separate defects were involved. Projections are now stored and shown verbatim. The Elo Ratings page never kept the number typed into it — the field was a display derived from Elo, so a pasted 95 rendered as 95.1 the moment it was applied (wins to Elo rounds to an integer Elo) and drifted again after each run, because a run re-resolves that Elo through the input policy. The loader now reads back the stored projection and the paste flow keeps the pasted value as-is; the derived round-trip survives only as a prefill for seasons that have never had a projection saved. A stale Elo no longer silently outranks a projection. baseEloPriority takes the first available base source, and the simulator page's bulk CSV wrote projectedWins without stamping metadata.sourceEloMethod, so the non-destructive upsert left the old Elo in place as a trusted direct value and it won the race — the projection was stored and then ignored on every run. The CSV path now stamps the flag like the Elo Ratings page does, the metadata upsert merges rather than replaces so a flag-only write keeps unrelated keys, and Base Elo Source is editable per season for the case where a genuine hand-entered Elo should still lose to projections. Projected wins now act as a projected final total. The value was baked into a flat season-long rate (projectedWins / 162) applied to every remaining game, so a team at 60-50 projected for 95 finished around 90.5 and the projection was never reached mid-season. seedingWinRateFor spreads the difference over the games still to play, which is a no-op pre-season where the two rates coincide; projectedWinsWeight blends it back toward the Elo-implied rate. Playoff-parity compression is restored for Elo-rated teams. eloToRDif scaled by RDIF_DIVISOR, making it the exact algebraic inverse of winRateFromRDif, so any team with an Elo skipped the compression every hardcoded-rdif team gets: a 95-win projection became RDif +686 and played playoff games at .586 instead of the documented ~.517. It now scales by SEEDING_RDIF_SCALE, landing at ~+140 alongside the Dodgers' hardcoded +137. Also fixes the preview table's "missing a required input" marker, which flagged every projection-configured participant because a generated Elo or rating is deliberately hidden from getParticipantSimulatorInputs. It now consults the resolved values, so it agrees with readiness. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01CQSEmmojmqmGdJttgzqCWK
2026-08-29 05:31:15 +00:00
seedingWinRateFor,
Fix MLB simulator: projected wins drive seeding, perf fix, + surface simulate errors (#65) ## Summary - **MLB simulator seeding now responds to projected wins**: replaced hardcoded FanGraphs `p_div`/`p_wc` probability draws with Binomial regular-season simulation. Admin-entered projected wins (via Elo) now drive both playoff _qualification_ odds and in-bracket game win probability, not just the latter. - **Reads current standings mid-season**: `getRegularSeasonStandings` is called so synced `wins`/`gamesPlayed` feed into each simulation iteration's projected final standings. - **27× seeding performance improvement**: `sampleBinomial` now uses a Box-Muller normal approximation for `n ≥ 30`, dropping the seeding phase from ~243M to ~3M `Math.random()` calls per 50K-sim run (pre-season, 162 remaining games × 30 teams). - **Missing-standings warning**: when standings exist for some teams but not all recognized ones (partial sync), a `logger.warn` now surfaces which teams are falling back to 0 wins / 162 remaining instead of silently distorting seeding. - **Cleanup**: `eloToRDif` calls `rawWinRateFromElo` instead of inlining the same formula. - **Simulate errors surface inline**: moved simulation action from dedicated route to parent page `intent="simulate"` so errors display inline rather than crashing to an error page. ## Test plan - [ ] `npm run test:run -- mlb-simulator` — 49 tests pass - [ ] `npm run typecheck` — clean - [ ] Trigger a simulation from the admin panel for an MLB season with projected wins entered; confirm teams with higher projected wins show meaningfully higher EVs - [ ] Confirm that running simulate with no projected wins entered (pre-season defaults) still produces a valid bracket - [ ] Check logs after simulating a season where some teams lack standings rows — confirm warning appears 🤖 Generated with [Claude Code](https://claude.com/claude-code) Co-authored-by: Chris Parsons <chrisparsons1127@gmail.com> Reviewed-on: https://forge.brackt.com/chrisp/brackt/pulls/65
2026-06-01 20:50:03 +00:00
sampleBinomial,
Add MLB playoff simulator with AL/NL division standings, fixes #121 (#225) * Add MLB playoff simulator with AL/NL division standings, fixes #121 - New `mlb-simulator.ts`: 50k Monte Carlo sim drawing division winners (weighted by p_div) and 3 WC teams per league, then simulating WC best-of-3 → DS best-of-5 → LCS best-of-7 → World Series. Elo parity factor 350; blends Vegas odds 30/70 when sourceOdds available. - New `standings-sync/mlb.ts`: adapter for free statsapi.mlb.com API, mapping AL/NL conferences, division ranks, streaks, home/away/L10 splits. - New `mlb-divisions` display mode in RegularSeasonStandings: shows 1 division winner per division section + Wild Card section with 3-spot playoff line, headings read "AL/NL League" instead of "Conference". - Refactored buildNhlSections/buildMlbSections into shared buildDivisionSections (divisionSpots + wcSpots params); conferenceLabel now flows through group objects rather than being derived from displayMode in the render. - DB migration 0062 adds `mlb_bracket` to simulator_type enum. - 37 new tests across simulator, adapter, and component. Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> * Fix flaky tennis simulator test: increase trials and lower threshold 500 trials with a ~3–5% expected win rate had enough variance to occasionally land below the 0.03 threshold (~2% failure rate). Bumping to 2000 trials reduces the std dev by 2x; lowering the threshold to 0.02 keeps the assertion meaningful (still well above random 0.78%) while eliminating the flakiness. Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> --------- Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com>
2026-03-25 08:47:02 -07:00
simBo3,
simBo5,
simBo7,
} from "../mlb-simulator";
// ─── normalizeTeamName ────────────────────────────────────────────────────────
describe("normalizeTeamName", () => {
it("lowercases and trims", () => {
expect(normalizeTeamName(" Los Angeles Dodgers ")).toBe("los angeles dodgers");
});
it("collapses internal whitespace", () => {
expect(normalizeTeamName("New York Yankees")).toBe("new york yankees");
});
it("is identity for already-normalized strings", () => {
expect(normalizeTeamName("houston astros")).toBe("houston astros");
});
});
// ─── getTeamData ──────────────────────────────────────────────────────────────
describe("getTeamData", () => {
it("returns data for an exact match", () => {
const d = getTeamData("Los Angeles Dodgers");
expect(d).toBeDefined();
expect(d?.league).toBe("NL");
expect(d?.division).toBe("NL West");
expect(d?.rdif).toBeGreaterThan(0);
Add MLB playoff simulator with AL/NL division standings, fixes #121 (#225) * Add MLB playoff simulator with AL/NL division standings, fixes #121 - New `mlb-simulator.ts`: 50k Monte Carlo sim drawing division winners (weighted by p_div) and 3 WC teams per league, then simulating WC best-of-3 → DS best-of-5 → LCS best-of-7 → World Series. Elo parity factor 350; blends Vegas odds 30/70 when sourceOdds available. - New `standings-sync/mlb.ts`: adapter for free statsapi.mlb.com API, mapping AL/NL conferences, division ranks, streaks, home/away/L10 splits. - New `mlb-divisions` display mode in RegularSeasonStandings: shows 1 division winner per division section + Wild Card section with 3-spot playoff line, headings read "AL/NL League" instead of "Conference". - Refactored buildNhlSections/buildMlbSections into shared buildDivisionSections (divisionSpots + wcSpots params); conferenceLabel now flows through group objects rather than being derived from displayMode in the render. - DB migration 0062 adds `mlb_bracket` to simulator_type enum. - 37 new tests across simulator, adapter, and component. Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> * Fix flaky tennis simulator test: increase trials and lower threshold 500 trials with a ~3–5% expected win rate had enough variance to occasionally land below the 0.03 threshold (~2% failure rate). Bumping to 2000 trials reduces the std dev by 2x; lowering the threshold to 0.02 keeps the assertion meaningful (still well above random 0.78%) while eliminating the flakiness. Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> --------- Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com>
2026-03-25 08:47:02 -07:00
});
it("is case-insensitive", () => {
expect(getTeamData("los angeles dodgers")).toEqual(getTeamData("Los Angeles Dodgers"));
});
it("returns undefined for an unknown team", () => {
expect(getTeamData("Springfield Isotopes")).toBeUndefined();
});
it("all 30 MLB teams are present", () => {
const allTeams = [
// AL East
"New York Yankees", "Baltimore Orioles", "Boston Red Sox",
"Tampa Bay Rays", "Toronto Blue Jays",
// AL Central
"Kansas City Royals", "Cleveland Guardians", "Minnesota Twins",
"Detroit Tigers", "Chicago White Sox",
// AL West
"Houston Astros", "Seattle Mariners", "Texas Rangers",
"Los Angeles Angels", "Athletics",
// NL East
"Philadelphia Phillies", "Atlanta Braves", "New York Mets",
"Washington Nationals", "Miami Marlins",
// NL Central
"Milwaukee Brewers", "Chicago Cubs", "St. Louis Cardinals",
"Cincinnati Reds", "Pittsburgh Pirates",
// NL West
"Los Angeles Dodgers", "San Diego Padres", "Arizona Diamondbacks",
"San Francisco Giants", "Colorado Rockies",
];
for (const name of allTeams) {
expect(getTeamData(name), `missing team: ${name}`).toBeDefined();
}
});
it("all teams have the correct league", () => {
const alTeams = [
"New York Yankees", "Baltimore Orioles", "Boston Red Sox", "Tampa Bay Rays", "Toronto Blue Jays",
"Kansas City Royals", "Cleveland Guardians", "Minnesota Twins", "Detroit Tigers", "Chicago White Sox",
"Houston Astros", "Seattle Mariners", "Texas Rangers", "Los Angeles Angels", "Athletics",
];
const nlTeams = [
"Philadelphia Phillies", "Atlanta Braves", "New York Mets", "Washington Nationals", "Miami Marlins",
"Milwaukee Brewers", "Chicago Cubs", "St. Louis Cardinals", "Cincinnati Reds", "Pittsburgh Pirates",
"Los Angeles Dodgers", "San Diego Padres", "Arizona Diamondbacks", "San Francisco Giants", "Colorado Rockies",
];
for (const name of alTeams) {
expect(getTeamData(name)?.league, `${name} should be AL`).toBe("AL");
}
for (const name of nlTeams) {
expect(getTeamData(name)?.league, `${name} should be NL`).toBe("NL");
}
});
it("Dodgers have the highest RDif in NL West", () => {
const dodgers = getTeamData("Los Angeles Dodgers")?.rdif ?? -999;
const padres = getTeamData("San Diego Padres")?.rdif ?? -999;
const dbacks = getTeamData("Arizona Diamondbacks")?.rdif ?? -999;
expect(dodgers).toBeGreaterThan(padres);
expect(dodgers).toBeGreaterThan(dbacks);
Add MLB playoff simulator with AL/NL division standings, fixes #121 (#225) * Add MLB playoff simulator with AL/NL division standings, fixes #121 - New `mlb-simulator.ts`: 50k Monte Carlo sim drawing division winners (weighted by p_div) and 3 WC teams per league, then simulating WC best-of-3 → DS best-of-5 → LCS best-of-7 → World Series. Elo parity factor 350; blends Vegas odds 30/70 when sourceOdds available. - New `standings-sync/mlb.ts`: adapter for free statsapi.mlb.com API, mapping AL/NL conferences, division ranks, streaks, home/away/L10 splits. - New `mlb-divisions` display mode in RegularSeasonStandings: shows 1 division winner per division section + Wild Card section with 3-spot playoff line, headings read "AL/NL League" instead of "Conference". - Refactored buildNhlSections/buildMlbSections into shared buildDivisionSections (divisionSpots + wcSpots params); conferenceLabel now flows through group objects rather than being derived from displayMode in the render. - DB migration 0062 adds `mlb_bracket` to simulator_type enum. - 37 new tests across simulator, adapter, and component. Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> * Fix flaky tennis simulator test: increase trials and lower threshold 500 trials with a ~3–5% expected win rate had enough variance to occasionally land below the 0.03 threshold (~2% failure rate). Bumping to 2000 trials reduces the std dev by 2x; lowering the threshold to 0.02 keeps the assertion meaningful (still well above random 0.78%) while eliminating the flakiness. Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> --------- Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com>
2026-03-25 08:47:02 -07:00
});
it("rebuilding teams have negative RDif", () => {
expect(getTeamData("Chicago White Sox")?.rdif ?? 0).toBeLessThan(0);
expect(getTeamData("Colorado Rockies")?.rdif ?? 0).toBeLessThan(0);
Add MLB playoff simulator with AL/NL division standings, fixes #121 (#225) * Add MLB playoff simulator with AL/NL division standings, fixes #121 - New `mlb-simulator.ts`: 50k Monte Carlo sim drawing division winners (weighted by p_div) and 3 WC teams per league, then simulating WC best-of-3 → DS best-of-5 → LCS best-of-7 → World Series. Elo parity factor 350; blends Vegas odds 30/70 when sourceOdds available. - New `standings-sync/mlb.ts`: adapter for free statsapi.mlb.com API, mapping AL/NL conferences, division ranks, streaks, home/away/L10 splits. - New `mlb-divisions` display mode in RegularSeasonStandings: shows 1 division winner per division section + Wild Card section with 3-spot playoff line, headings read "AL/NL League" instead of "Conference". - Refactored buildNhlSections/buildMlbSections into shared buildDivisionSections (divisionSpots + wcSpots params); conferenceLabel now flows through group objects rather than being derived from displayMode in the render. - DB migration 0062 adds `mlb_bracket` to simulator_type enum. - 37 new tests across simulator, adapter, and component. Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> * Fix flaky tennis simulator test: increase trials and lower threshold 500 trials with a ~3–5% expected win rate had enough variance to occasionally land below the 0.03 threshold (~2% failure rate). Bumping to 2000 trials reduces the std dev by 2x; lowering the threshold to 0.02 keeps the assertion meaningful (still well above random 0.78%) while eliminating the flakiness. Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> --------- Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com>
2026-03-25 08:47:02 -07:00
});
});
// ─── winRateFromRDif ──────────────────────────────────────────────────────────
describe("winRateFromRDif", () => {
it("returns 0.5 for RDif = 0", () => {
expect(winRateFromRDif(0)).toBeCloseTo(0.5, 6);
});
it("returns a value above 0.5 for positive RDif", () => {
expect(winRateFromRDif(100)).toBeGreaterThan(0.5);
});
it("returns a value below 0.5 for negative RDif", () => {
expect(winRateFromRDif(-100)).toBeLessThan(0.5);
});
it("clamps to [0.01, 0.99]", () => {
expect(winRateFromRDif(10000)).toBe(0.99);
expect(winRateFromRDif(-10000)).toBe(0.01);
});
it("Dodgers (RDif +137) project to a win rate above .500", () => {
expect(winRateFromRDif(137)).toBeGreaterThan(0.5);
expect(winRateFromRDif(137)).toBeLessThan(0.65);
});
});
Fix MLB simulator: projected wins drive seeding, perf fix, + surface simulate errors (#65) ## Summary - **MLB simulator seeding now responds to projected wins**: replaced hardcoded FanGraphs `p_div`/`p_wc` probability draws with Binomial regular-season simulation. Admin-entered projected wins (via Elo) now drive both playoff _qualification_ odds and in-bracket game win probability, not just the latter. - **Reads current standings mid-season**: `getRegularSeasonStandings` is called so synced `wins`/`gamesPlayed` feed into each simulation iteration's projected final standings. - **27× seeding performance improvement**: `sampleBinomial` now uses a Box-Muller normal approximation for `n ≥ 30`, dropping the seeding phase from ~243M to ~3M `Math.random()` calls per 50K-sim run (pre-season, 162 remaining games × 30 teams). - **Missing-standings warning**: when standings exist for some teams but not all recognized ones (partial sync), a `logger.warn` now surfaces which teams are falling back to 0 wins / 162 remaining instead of silently distorting seeding. - **Cleanup**: `eloToRDif` calls `rawWinRateFromElo` instead of inlining the same formula. - **Simulate errors surface inline**: moved simulation action from dedicated route to parent page `intent="simulate"` so errors display inline rather than crashing to an error page. ## Test plan - [ ] `npm run test:run -- mlb-simulator` — 49 tests pass - [ ] `npm run typecheck` — clean - [ ] Trigger a simulation from the admin panel for an MLB season with projected wins entered; confirm teams with higher projected wins show meaningfully higher EVs - [ ] Confirm that running simulate with no projected wins entered (pre-season defaults) still produces a valid bracket - [ ] Check logs after simulating a season where some teams lack standings rows — confirm warning appears 🤖 Generated with [Claude Code](https://claude.com/claude-code) Co-authored-by: Chris Parsons <chrisparsons1127@gmail.com> Reviewed-on: https://forge.brackt.com/chrisp/brackt/pulls/65
2026-06-01 20:50:03 +00:00
// ─── rawWinRateFromRDif ───────────────────────────────────────────────────────
describe("rawWinRateFromRDif", () => {
it("returns 0.5 for RDif = 0", () => {
expect(rawWinRateFromRDif(0)).toBeCloseTo(0.5, 6);
});
it("is higher than winRateFromRDif for positive RDif (less compression)", () => {
const rdif = 137;
expect(rawWinRateFromRDif(rdif)).toBeGreaterThan(winRateFromRDif(rdif));
});
it("Dodgers (RDif +137) project to ~.585 season win rate", () => {
// 137 runs / 1620 ≈ 0.585
expect(rawWinRateFromRDif(137)).toBeCloseTo(0.585, 2);
});
it("clamps to [0.01, 0.99]", () => {
expect(rawWinRateFromRDif(10000)).toBe(0.99);
expect(rawWinRateFromRDif(-10000)).toBe(0.01);
});
});
// ─── rawWinRateFromElo ────────────────────────────────────────────────────────
describe("rawWinRateFromElo", () => {
it("returns 0.5 for Elo 1500 (average)", () => {
expect(rawWinRateFromElo(1500)).toBeCloseTo(0.5, 6);
});
it("returns above 0.5 for Elo above 1500", () => {
expect(rawWinRateFromElo(1600)).toBeGreaterThan(0.5);
});
it("returns below 0.5 for Elo below 1500", () => {
expect(rawWinRateFromElo(1400)).toBeLessThan(0.5);
});
it("round-trips from projected wins: projectedWins → Elo → rawWinRate ≈ winRate", () => {
// 95 wins out of 162 → winRate ≈ 0.5864
const projectedWins = 95;
const totalGames = 162;
const winRate = projectedWins / totalGames;
// Build Elo from winRate the same way projectedWinsToElo does
const elo = 1500 - 400 * Math.log10((1 - winRate) / winRate);
expect(rawWinRateFromElo(elo)).toBeCloseTo(winRate, 4);
});
it("is symmetric around 1500", () => {
expect(rawWinRateFromElo(1600)).toBeCloseTo(1 - rawWinRateFromElo(1400), 6);
});
});
// ─── rdifWinProbability ───────────────────────────────────────────────────────
describe("rdifWinProbability (log5)", () => {
it("returns 0.5 for equal RDif", () => {
expect(rdifWinProbability(50, 50)).toBeCloseTo(0.5, 6);
});
it("favors the team with better RDif", () => {
expect(rdifWinProbability(100, 0)).toBeGreaterThan(0.5);
expect(rdifWinProbability(0, 100)).toBeLessThan(0.5);
});
it("is anti-symmetric: P(A>B) + P(B>A) = 1", () => {
const p = rdifWinProbability(80, -20);
expect(p + rdifWinProbability(-20, 80)).toBeCloseTo(1.0, 10);
});
it("returns a value strictly between 0 and 1", () => {
expect(rdifWinProbability(200, -200)).toBeGreaterThan(0);
expect(rdifWinProbability(200, -200)).toBeLessThan(1);
});
it("Dodgers vs Rockies favors the Dodgers", () => {
// Even the largest RDif gap in the league should still favour the better team,
// but compression toward .500 via RDIF_DIVISOR keeps it well below 1.0.
const p = rdifWinProbability(137, -173);
expect(p).toBeGreaterThan(0.5);
expect(p).toBeLessThan(1.0);
Add MLB playoff simulator with AL/NL division standings, fixes #121 (#225) * Add MLB playoff simulator with AL/NL division standings, fixes #121 - New `mlb-simulator.ts`: 50k Monte Carlo sim drawing division winners (weighted by p_div) and 3 WC teams per league, then simulating WC best-of-3 → DS best-of-5 → LCS best-of-7 → World Series. Elo parity factor 350; blends Vegas odds 30/70 when sourceOdds available. - New `standings-sync/mlb.ts`: adapter for free statsapi.mlb.com API, mapping AL/NL conferences, division ranks, streaks, home/away/L10 splits. - New `mlb-divisions` display mode in RegularSeasonStandings: shows 1 division winner per division section + Wild Card section with 3-spot playoff line, headings read "AL/NL League" instead of "Conference". - Refactored buildNhlSections/buildMlbSections into shared buildDivisionSections (divisionSpots + wcSpots params); conferenceLabel now flows through group objects rather than being derived from displayMode in the render. - DB migration 0062 adds `mlb_bracket` to simulator_type enum. - 37 new tests across simulator, adapter, and component. Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> * Fix flaky tennis simulator test: increase trials and lower threshold 500 trials with a ~3–5% expected win rate had enough variance to occasionally land below the 0.03 threshold (~2% failure rate). Bumping to 2000 trials reduces the std dev by 2x; lowering the threshold to 0.02 keeps the assertion meaningful (still well above random 0.78%) while eliminating the flakiness. Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> --------- Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com>
2026-03-25 08:47:02 -07:00
});
});
Fix MLB simulator: projected wins drive seeding, perf fix, + surface simulate errors (#65) ## Summary - **MLB simulator seeding now responds to projected wins**: replaced hardcoded FanGraphs `p_div`/`p_wc` probability draws with Binomial regular-season simulation. Admin-entered projected wins (via Elo) now drive both playoff _qualification_ odds and in-bracket game win probability, not just the latter. - **Reads current standings mid-season**: `getRegularSeasonStandings` is called so synced `wins`/`gamesPlayed` feed into each simulation iteration's projected final standings. - **27× seeding performance improvement**: `sampleBinomial` now uses a Box-Muller normal approximation for `n ≥ 30`, dropping the seeding phase from ~243M to ~3M `Math.random()` calls per 50K-sim run (pre-season, 162 remaining games × 30 teams). - **Missing-standings warning**: when standings exist for some teams but not all recognized ones (partial sync), a `logger.warn` now surfaces which teams are falling back to 0 wins / 162 remaining instead of silently distorting seeding. - **Cleanup**: `eloToRDif` calls `rawWinRateFromElo` instead of inlining the same formula. - **Simulate errors surface inline**: moved simulation action from dedicated route to parent page `intent="simulate"` so errors display inline rather than crashing to an error page. ## Test plan - [ ] `npm run test:run -- mlb-simulator` — 49 tests pass - [ ] `npm run typecheck` — clean - [ ] Trigger a simulation from the admin panel for an MLB season with projected wins entered; confirm teams with higher projected wins show meaningfully higher EVs - [ ] Confirm that running simulate with no projected wins entered (pre-season defaults) still produces a valid bracket - [ ] Check logs after simulating a season where some teams lack standings rows — confirm warning appears 🤖 Generated with [Claude Code](https://claude.com/claude-code) Co-authored-by: Chris Parsons <chrisparsons1127@gmail.com> Reviewed-on: https://forge.brackt.com/chrisp/brackt/pulls/65
2026-06-01 20:50:03 +00:00
// ─── sampleBinomial ───────────────────────────────────────────────────────────
describe("sampleBinomial", () => {
it("returns 0 when n = 0", () => {
expect(sampleBinomial(0, 0.5)).toBe(0);
});
it("returns 0 when p = 0 (exact path, n < 30)", () => {
expect(sampleBinomial(10, 0)).toBe(0);
});
it("returns n when p = 1 (exact path, n < 30)", () => {
expect(sampleBinomial(10, 1)).toBe(10);
});
it("returns 0 when p = 0 (normal-approx path, n >= 30)", () => {
// p <= 0 guard fires before normal approx
expect(sampleBinomial(162, 0)).toBe(0);
});
it("returns n when p = 1 (normal-approx path, n >= 30)", () => {
// p >= 1 guard fires before normal approx
expect(sampleBinomial(162, 1)).toBe(162);
});
it("result is always in [0, n] — exact path (n < 30)", () => {
for (let i = 0; i < 50; i++) {
const result = sampleBinomial(10, 0.5);
expect(result).toBeGreaterThanOrEqual(0);
expect(result).toBeLessThanOrEqual(10);
}
});
it("result is always in [0, n] — normal-approx path (n >= 30)", () => {
for (let i = 0; i < 50; i++) {
const result = sampleBinomial(162, 0.5);
expect(result).toBeGreaterThanOrEqual(0);
expect(result).toBeLessThanOrEqual(162);
}
});
it("mean is close to n*p over many samples — normal-approx path", () => {
const n = 162;
const p = 0.586;
const samples = Array.from({ length: 2000 }, () => sampleBinomial(n, p));
const mean = samples.reduce((s, x) => s + x, 0) / samples.length;
// Expected mean ≈ 94.9; allow ±3 (well within 3σ for 2000 samples)
expect(mean).toBeGreaterThan(n * p - 3);
expect(mean).toBeLessThan(n * p + 3);
});
it("mean is close to n*p over many samples — exact path", () => {
const n = 10;
const p = 0.6;
const samples = Array.from({ length: 2000 }, () => sampleBinomial(n, p));
const mean = samples.reduce((s, x) => s + x, 0) / samples.length;
// Expected mean = 6; allow ±0.5
expect(mean).toBeGreaterThan(n * p - 0.5);
expect(mean).toBeLessThan(n * p + 0.5);
});
});
Add MLB playoff simulator with AL/NL division standings, fixes #121 (#225) * Add MLB playoff simulator with AL/NL division standings, fixes #121 - New `mlb-simulator.ts`: 50k Monte Carlo sim drawing division winners (weighted by p_div) and 3 WC teams per league, then simulating WC best-of-3 → DS best-of-5 → LCS best-of-7 → World Series. Elo parity factor 350; blends Vegas odds 30/70 when sourceOdds available. - New `standings-sync/mlb.ts`: adapter for free statsapi.mlb.com API, mapping AL/NL conferences, division ranks, streaks, home/away/L10 splits. - New `mlb-divisions` display mode in RegularSeasonStandings: shows 1 division winner per division section + Wild Card section with 3-spot playoff line, headings read "AL/NL League" instead of "Conference". - Refactored buildNhlSections/buildMlbSections into shared buildDivisionSections (divisionSpots + wcSpots params); conferenceLabel now flows through group objects rather than being derived from displayMode in the render. - DB migration 0062 adds `mlb_bracket` to simulator_type enum. - 37 new tests across simulator, adapter, and component. Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> * Fix flaky tennis simulator test: increase trials and lower threshold 500 trials with a ~3–5% expected win rate had enough variance to occasionally land below the 0.03 threshold (~2% failure rate). Bumping to 2000 trials reduces the std dev by 2x; lowering the threshold to 0.02 keeps the assertion meaningful (still well above random 0.78%) while eliminating the flakiness. Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> --------- Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com>
2026-03-25 08:47:02 -07:00
// ─── Series simulators ────────────────────────────────────────────────────────
Make MLB projected wins actually drive the simulation Entering projected wins for an in-progress MLB season did not behave as expected: the entered numbers came back changed, and the simulation appeared to ignore them in favour of whatever Elo was already stored. Four separate defects were involved. Projections are now stored and shown verbatim. The Elo Ratings page never kept the number typed into it — the field was a display derived from Elo, so a pasted 95 rendered as 95.1 the moment it was applied (wins to Elo rounds to an integer Elo) and drifted again after each run, because a run re-resolves that Elo through the input policy. The loader now reads back the stored projection and the paste flow keeps the pasted value as-is; the derived round-trip survives only as a prefill for seasons that have never had a projection saved. A stale Elo no longer silently outranks a projection. baseEloPriority takes the first available base source, and the simulator page's bulk CSV wrote projectedWins without stamping metadata.sourceEloMethod, so the non-destructive upsert left the old Elo in place as a trusted direct value and it won the race — the projection was stored and then ignored on every run. The CSV path now stamps the flag like the Elo Ratings page does, the metadata upsert merges rather than replaces so a flag-only write keeps unrelated keys, and Base Elo Source is editable per season for the case where a genuine hand-entered Elo should still lose to projections. Projected wins now act as a projected final total. The value was baked into a flat season-long rate (projectedWins / 162) applied to every remaining game, so a team at 60-50 projected for 95 finished around 90.5 and the projection was never reached mid-season. seedingWinRateFor spreads the difference over the games still to play, which is a no-op pre-season where the two rates coincide; projectedWinsWeight blends it back toward the Elo-implied rate. Playoff-parity compression is restored for Elo-rated teams. eloToRDif scaled by RDIF_DIVISOR, making it the exact algebraic inverse of winRateFromRDif, so any team with an Elo skipped the compression every hardcoded-rdif team gets: a 95-win projection became RDif +686 and played playoff games at .586 instead of the documented ~.517. It now scales by SEEDING_RDIF_SCALE, landing at ~+140 alongside the Dodgers' hardcoded +137. Also fixes the preview table's "missing a required input" marker, which flagged every projection-configured participant because a generated Elo or rating is deliberately hidden from getParticipantSimulatorInputs. It now consults the resolved values, so it agrees with readiness. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01CQSEmmojmqmGdJttgzqCWK
2026-08-29 05:31:15 +00:00
const teamA = { id: "a", name: "Team A", data: undefined, currentWins: 0, remainingGames: 0, projectedWins: null };
const teamB = { id: "b", name: "Team B", data: undefined, currentWins: 0, remainingGames: 0, projectedWins: null };
Add MLB playoff simulator with AL/NL division standings, fixes #121 (#225) * Add MLB playoff simulator with AL/NL division standings, fixes #121 - New `mlb-simulator.ts`: 50k Monte Carlo sim drawing division winners (weighted by p_div) and 3 WC teams per league, then simulating WC best-of-3 → DS best-of-5 → LCS best-of-7 → World Series. Elo parity factor 350; blends Vegas odds 30/70 when sourceOdds available. - New `standings-sync/mlb.ts`: adapter for free statsapi.mlb.com API, mapping AL/NL conferences, division ranks, streaks, home/away/L10 splits. - New `mlb-divisions` display mode in RegularSeasonStandings: shows 1 division winner per division section + Wild Card section with 3-spot playoff line, headings read "AL/NL League" instead of "Conference". - Refactored buildNhlSections/buildMlbSections into shared buildDivisionSections (divisionSpots + wcSpots params); conferenceLabel now flows through group objects rather than being derived from displayMode in the render. - DB migration 0062 adds `mlb_bracket` to simulator_type enum. - 37 new tests across simulator, adapter, and component. Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> * Fix flaky tennis simulator test: increase trials and lower threshold 500 trials with a ~3–5% expected win rate had enough variance to occasionally land below the 0.03 threshold (~2% failure rate). Bumping to 2000 trials reduces the std dev by 2x; lowering the threshold to 0.02 keeps the assertion meaningful (still well above random 0.78%) while eliminating the flakiness. Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> --------- Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com>
2026-03-25 08:47:02 -07:00
const alwaysA = () => 1.0; // team A always wins each game
const alwaysB = () => 0.0; // team B always wins each game
const coinFlip = () => 0.5;
describe("simBo3 (Wildcard Round — first to 2 wins)", () => {
it("correct team wins when one side is dominant", () => {
expect(simBo3(teamA, teamB, alwaysA).winner).toBe(teamA);
expect(simBo3(teamA, teamB, alwaysB).winner).toBe(teamB);
});
it("returns a winner and loser", () => {
const result = simBo3(teamA, teamB, coinFlip);
expect([teamA, teamB]).toContain(result.winner);
expect([teamA, teamB]).toContain(result.loser);
expect(result.winner).not.toBe(result.loser);
});
});
describe("simBo5 (Division Series — first to 3 wins)", () => {
it("correct team wins when one side is dominant", () => {
expect(simBo5(teamA, teamB, alwaysA).winner).toBe(teamA);
expect(simBo5(teamA, teamB, alwaysB).winner).toBe(teamB);
});
it("returns a winner and loser", () => {
const result = simBo5(teamA, teamB, coinFlip);
expect([teamA, teamB]).toContain(result.winner);
expect(result.winner).not.toBe(result.loser);
});
});
describe("simBo7 (LCS / World Series — first to 4 wins)", () => {
it("correct team wins when one side is dominant", () => {
expect(simBo7(teamA, teamB, alwaysA).winner).toBe(teamA);
expect(simBo7(teamA, teamB, alwaysB).winner).toBe(teamB);
});
it("returns a winner and loser", () => {
const result = simBo7(teamA, teamB, coinFlip);
expect([teamA, teamB]).toContain(result.winner);
expect(result.winner).not.toBe(result.loser);
});
});
Fix simulator brackets: NHL bracket-aware mode, MLB/NBA/WNBA sourceElo support (#358) * Fix NHL bracket-aware simulation and MLB sourceElo support NHL: NHLSimulator now checks for a populated playoff_game bracket before falling back to season-projection mode. When a bracket exists (e.g. via simple_16 template), it simulates the actual bracket structure, respecting completed matches and using ELO+odds blending for the rest — matching the pattern used by Snooker, NBA, and UCL simulators. MLB: MLBSimulator now reads sourceElo from participantExpectedValues and converts it to an effective RDif (via eloToRDif), overriding the hardcoded TEAMS_DATA.rdif when present. This wires up the expected-wins admin form (which saves sourceElo) to the simulation engine. https://claude.ai/code/session_01139GJVg2gqgDjcUzqhnBNn * Wire sourceElo from projected wins form into NBA, NHL, and WNBA simulators All three simulators had entries in simulator-config.ts (enabling the projected wins form in the admin UI) but silently ignored the sourceElo that was saved. NBA: Both bracket-aware and season-projection modes now load sourceElo and prefer it over hardcoded TEAMS_DATA elo. Added resolvedElo field to TeamEntry so eloOfEntry() uses the correct value throughout. NHL: Season-projection mode now fetches sourceElo + sourceOdds in a single parallel query (removing the duplicate evRows query). Bracket-aware mode also loads sourceElo alongside sourceOdds. Both modes use sourceElo > TEAMS_DATA > 1400. WNBA: resolveElo() now accepts sourceElo as an optional highest-priority argument. The evRows query fetches sourceElo alongside sourceOdds and passes it through when building team entries. https://claude.ai/code/session_01139GJVg2gqgDjcUzqhnBNn * Add review fixes: NHL R1 validation, WNBA sourceElo tests, NHL bracket unit tests - NHLSimulator.simulateBracket: remove unused nameById variable - NHLSimulator.simulateBracket: validate all R1 participants before entering Monte Carlo loop; throws with a clear message if any slot is missing - wnba-simulator.test.ts: add 5 tests covering the sourceElo override parameter on resolveElo() (overrides SRS, overrides futures, overrides fallback, null/undefined fall through to normal priority chain) - nhl-simulator.test.ts: add full bracket-aware integration suite (10 tests) covering fallback to season-projection, structure validation errors, probability distributions, fully-decided champion, and source tag https://claude.ai/code/session_01139GJVg2gqgDjcUzqhnBNn * Fix TS error: add resolvedElo to makeEntry in nhl-simulator.test.ts TeamEntry requires resolvedElo after the simulator refactor. https://claude.ai/code/session_01139GJVg2gqgDjcUzqhnBNn * Fix lint: replace non-null assertions with null-safe alternatives in NHL test https://claude.ai/code/session_01139GJVg2gqgDjcUzqhnBNn --------- Co-authored-by: Claude <noreply@anthropic.com>
2026-04-30 08:33:57 -07:00
// ─── eloToRDif ────────────────────────────────────────────────────────────────
describe("eloToRDif", () => {
it("maps Elo 1500 (average) to RDif 0", () => {
expect(eloToRDif(1500)).toBeCloseTo(0, 5);
});
it("maps Elo above 1500 to a positive RDif", () => {
expect(eloToRDif(1600)).toBeGreaterThan(0);
});
it("maps Elo below 1500 to a negative RDif", () => {
expect(eloToRDif(1400)).toBeLessThan(0);
});
it("is symmetric: eloToRDif(1500 + d) = -eloToRDif(1500 - d)", () => {
expect(eloToRDif(1600)).toBeCloseTo(-eloToRDif(1400), 5);
});
Make MLB projected wins actually drive the simulation Entering projected wins for an in-progress MLB season did not behave as expected: the entered numbers came back changed, and the simulation appeared to ignore them in favour of whatever Elo was already stored. Four separate defects were involved. Projections are now stored and shown verbatim. The Elo Ratings page never kept the number typed into it — the field was a display derived from Elo, so a pasted 95 rendered as 95.1 the moment it was applied (wins to Elo rounds to an integer Elo) and drifted again after each run, because a run re-resolves that Elo through the input policy. The loader now reads back the stored projection and the paste flow keeps the pasted value as-is; the derived round-trip survives only as a prefill for seasons that have never had a projection saved. A stale Elo no longer silently outranks a projection. baseEloPriority takes the first available base source, and the simulator page's bulk CSV wrote projectedWins without stamping metadata.sourceEloMethod, so the non-destructive upsert left the old Elo in place as a trusted direct value and it won the race — the projection was stored and then ignored on every run. The CSV path now stamps the flag like the Elo Ratings page does, the metadata upsert merges rather than replaces so a flag-only write keeps unrelated keys, and Base Elo Source is editable per season for the case where a genuine hand-entered Elo should still lose to projections. Projected wins now act as a projected final total. The value was baked into a flat season-long rate (projectedWins / 162) applied to every remaining game, so a team at 60-50 projected for 95 finished around 90.5 and the projection was never reached mid-season. seedingWinRateFor spreads the difference over the games still to play, which is a no-op pre-season where the two rates coincide; projectedWinsWeight blends it back toward the Elo-implied rate. Playoff-parity compression is restored for Elo-rated teams. eloToRDif scaled by RDIF_DIVISOR, making it the exact algebraic inverse of winRateFromRDif, so any team with an Elo skipped the compression every hardcoded-rdif team gets: a 95-win projection became RDif +686 and played playoff games at .586 instead of the documented ~.517. It now scales by SEEDING_RDIF_SCALE, landing at ~+140 alongside the Dodgers' hardcoded +137. Also fixes the preview table's "missing a required input" marker, which flagged every projection-configured participant because a generated Elo or rating is deliberately hidden from getParticipantSimulatorInputs. It now consults the resolved values, so it agrees with readiness. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01CQSEmmojmqmGdJttgzqCWK
2026-08-29 05:31:15 +00:00
it("lands on the same run-differential scale as the hardcoded TEAMS_DATA rdif", () => {
// 95 projected wins out of 162 → Elo ≈ 1561. On the TEAMS_DATA scale that is a
// ~+140 run differential, right alongside the Dodgers' hardcoded +137 — not the
// ~+686 the old RDIF_DIVISOR scaling produced.
const winRate = 95 / 162;
const elo = 1500 - 400 * Math.log10((1 - winRate) / winRate);
expect(eloToRDif(elo)).toBeGreaterThan(120);
expect(eloToRDif(elo)).toBeLessThan(160);
});
it("is compressed by winRateFromRDif for playoff matchups, like a hardcoded rdif", () => {
// The whole point of RDIF_DIVISOR: playoff series are near coin-flips between
// playoff-calibre teams. An Elo-rated team must not skip that compression.
const winRate = 95 / 162;
const elo = 1500 - 400 * Math.log10((1 - winRate) / winRate);
const playoffRate = winRateFromRDif(eloToRDif(elo));
expect(playoffRate).toBeCloseTo(0.517, 2);
// Strictly compressed relative to the team's raw season win rate.
expect(playoffRate).toBeLessThan(rawWinRateFromElo(elo));
});
it("agrees with the hardcoded rdif path for a team of equivalent strength", () => {
// Dodgers: hardcoded +137. An Elo carrying the same seeding win rate should
// produce a comparable playoff win rate rather than a wildly more dominant one.
const dodgers = getTeamData("Los Angeles Dodgers");
const eloEquivalent = 1500 + 400 * Math.log10(
rawWinRateFromRDif(dodgers?.rdif ?? 0) / (1 - rawWinRateFromRDif(dodgers?.rdif ?? 0))
);
expect(winRateFromRDif(eloToRDif(eloEquivalent))).toBeCloseTo(
winRateFromRDif(dodgers?.rdif ?? 0),
3
);
});
});
// ─── seedingWinRateFor ────────────────────────────────────────────────────────
describe("seedingWinRateFor", () => {
const eloRate = 95 / 162; // ≈ 0.5864 — the rate a 95-win projection implies
it("is a no-op pre-season: the target equals the Elo-implied rate", () => {
expect(seedingWinRateFor(eloRate, 95, 0, 162)).toBeCloseTo(eloRate, 6);
});
it("spreads the shortfall over the remaining games mid-season", () => {
// 60-50 and projected for 95: 35 wins needed in 52 games ≈ .673, well above the
// .586 the season-long Elo implies. Without this the sim finishes around 90.5.
expect(seedingWinRateFor(eloRate, 95, 60, 52)).toBeCloseTo(35 / 52, 6);
});
it("reaches the projection in expectation", () => {
const currentWins = 60;
const remaining = 52;
const rate = seedingWinRateFor(eloRate, 95, currentWins, remaining);
expect(currentWins + rate * remaining).toBeCloseTo(95, 6);
});
it("clamps a team that has already passed its projection", () => {
expect(seedingWinRateFor(eloRate, 95, 96, 20)).toBe(0.01);
});
it("clamps a target that is unreachable", () => {
expect(seedingWinRateFor(eloRate, 95, 60, 10)).toBe(0.99);
});
it("falls back to the Elo rate with no projection", () => {
expect(seedingWinRateFor(eloRate, null, 60, 52)).toBe(eloRate);
});
it("falls back to the Elo rate when the season is over", () => {
expect(seedingWinRateFor(eloRate, 95, 95, 0)).toBe(eloRate);
});
it("falls back to the Elo rate at weight 0", () => {
expect(seedingWinRateFor(eloRate, 95, 60, 52, 0)).toBe(eloRate);
});
it("blends target and Elo rate at an intermediate weight", () => {
const target = 35 / 52;
expect(seedingWinRateFor(eloRate, 95, 60, 52, 0.5)).toBeCloseTo(
0.5 * target + 0.5 * eloRate,
6
);
Fix simulator brackets: NHL bracket-aware mode, MLB/NBA/WNBA sourceElo support (#358) * Fix NHL bracket-aware simulation and MLB sourceElo support NHL: NHLSimulator now checks for a populated playoff_game bracket before falling back to season-projection mode. When a bracket exists (e.g. via simple_16 template), it simulates the actual bracket structure, respecting completed matches and using ELO+odds blending for the rest — matching the pattern used by Snooker, NBA, and UCL simulators. MLB: MLBSimulator now reads sourceElo from participantExpectedValues and converts it to an effective RDif (via eloToRDif), overriding the hardcoded TEAMS_DATA.rdif when present. This wires up the expected-wins admin form (which saves sourceElo) to the simulation engine. https://claude.ai/code/session_01139GJVg2gqgDjcUzqhnBNn * Wire sourceElo from projected wins form into NBA, NHL, and WNBA simulators All three simulators had entries in simulator-config.ts (enabling the projected wins form in the admin UI) but silently ignored the sourceElo that was saved. NBA: Both bracket-aware and season-projection modes now load sourceElo and prefer it over hardcoded TEAMS_DATA elo. Added resolvedElo field to TeamEntry so eloOfEntry() uses the correct value throughout. NHL: Season-projection mode now fetches sourceElo + sourceOdds in a single parallel query (removing the duplicate evRows query). Bracket-aware mode also loads sourceElo alongside sourceOdds. Both modes use sourceElo > TEAMS_DATA > 1400. WNBA: resolveElo() now accepts sourceElo as an optional highest-priority argument. The evRows query fetches sourceElo alongside sourceOdds and passes it through when building team entries. https://claude.ai/code/session_01139GJVg2gqgDjcUzqhnBNn * Add review fixes: NHL R1 validation, WNBA sourceElo tests, NHL bracket unit tests - NHLSimulator.simulateBracket: remove unused nameById variable - NHLSimulator.simulateBracket: validate all R1 participants before entering Monte Carlo loop; throws with a clear message if any slot is missing - wnba-simulator.test.ts: add 5 tests covering the sourceElo override parameter on resolveElo() (overrides SRS, overrides futures, overrides fallback, null/undefined fall through to normal priority chain) - nhl-simulator.test.ts: add full bracket-aware integration suite (10 tests) covering fallback to season-projection, structure validation errors, probability distributions, fully-decided champion, and source tag https://claude.ai/code/session_01139GJVg2gqgDjcUzqhnBNn * Fix TS error: add resolvedElo to makeEntry in nhl-simulator.test.ts TeamEntry requires resolvedElo after the simulator refactor. https://claude.ai/code/session_01139GJVg2gqgDjcUzqhnBNn * Fix lint: replace non-null assertions with null-safe alternatives in NHL test https://claude.ai/code/session_01139GJVg2gqgDjcUzqhnBNn --------- Co-authored-by: Claude <noreply@anthropic.com>
2026-04-30 08:33:57 -07:00
});
});