When an admin entered futures (preseason) odds for a season that already
had Elo ratings stored, the simulator kept using the old Elo and silently
ignored the new odds. This affected any Elo-based simulator (e.g. NHL).
Root cause: resolveSourceElos() ranks a direct sourceElo above the
sourceOdds -> convertFuturesToElo branch, but batchSaveFuturesOddsForSimulator()
only cleared the bracket-seeding `rating`/`ratingMethod` — never the stale
`sourceElo`/`sourceEloMethod`. A manually entered Elo (method "direct") is not
treated as generated, so it survived and short-circuited the resolver.
Fix:
- batchSaveFuturesOddsForSimulator now also nulls sourceElo and strips
sourceEloMethod (both the pre-update and upsert-conflict paths), so the
existing futures -> Elo conversion drives the run.
- resolveSourceElos' sourceOdds branch now guards for >= 2 participants
(mirroring resolveRatings), so a lone-odds season falls through to the
configured missing-Elo strategy instead of getting a flat ~1500.
- batchSaveSourceOdds clears the legacy EV sourceElo and marks source as
futures_odds so the elo-ratings page won't resurrect a stale rating.
Adds unit coverage for odds-derived Elo, the single-participant guard, the
post-clear regression, generated-vs-direct sourceElo suppression, and the
new clearing behavior in batchSaveFuturesOddsForSimulator.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01YNfUEd9RzD3zm84oLHBHUH
Make a "major" (golf/tennis/CS2) scored once on its canonical tournament
and fan out to every linked sports_season window and league.
Fan-out & completion (app/services/sync-tournament-results.ts):
- syncTournamentResults now marks each synced window's event complete
(gated by markComplete), recalculates affected leagues, and counts
recalc failures so a stale league can't hide behind a "completed" badge
- syncMajorFromPrimaryEvent promotes a primary window's derived results to
canonical tournament_results (deleting rows for dropped placements) and
fans out to siblings; fanOutMajorIfPrimary guards on the primary
- placement removals now propagate (stale rows reset to filler)
Primary-event model (scoring_events.is_primary, migration 0122):
- getPrimaryEventForTournament / isReadOnlySibling / ensurePrimaryEvent /
setPrimaryEvent; event creation auto-seeds a primary for bracket majors;
"Make primary" button on the tournament page
- per-window event/bracket/cs2 pages are read-only for non-primary linked
events (not-participating stays editable)
Tennis Grand Slam bracket (tennis_128 template + TEMPLATE_ROUND_CONFIG):
- bracket-scored qualifying major via the existing bracket pipeline
- simulator conditions in-progress EV on the real bracket (honoring
completed matches, walkover for withdrawals), QP derived from config,
round structure read from the template; CS2 + tennis share resolveStructureSource
Backfill (scripts/backfill-major-linking.ts): one-time idempotent reconcile
of existing majors (link orphans, designate primary, promote canonical, sync).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The CS2 Major EV simulation silently discarded the Champions Stage
bracket for IEM Cologne 2026: the bracket seeded "Team Spirit" in QF1
while the stage assignments listed the (different) "Spirit Academy", so
the realBracket gate found an out-of-field participant and rejected the
whole bracket. The phantom "Spirit Academy" also left a stray
event_results row (33 rows for 32 teams).
The existing "Reset all" button only cleared cs2_major_stage_results, so
re-entering couldn't remove the phantom result or its cached QP total.
Add resetCs2Event, which also deletes the event's event_results and
recomputes the affected participants' cached QP totals — all inside a
single transaction so a mid-operation failure can't leave the event in a
torn state. It deliberately preserves the Champions Stage bracket so
re-entry realigns the stage data to it. The reset button now confirms
and states that results/QP are cleared too.
Tests: resetCs2Event clear+recompute behavior, and a simulator
regression pinning that one out-of-field QF participant disables the
whole bracket.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
## Summary
- 0-3 teams in Stage 3 were being assigned slots 9–10 (high QP) when marked eliminated before other Stage 3 teams, because `computeStage3ExitQP` filled from slot 9 upward using only the teams passed in
- 1-3 teams had the same problem when marked before 2-3 teams
- Fix: gate all Stage 3 QP computation on `stage3Exits.length === STAGE3_TOTAL_EXITS` (8) — partial saves write 0 QP as a placeholder, and correct QP/placements are assigned once all 8 exits are known
- As belt-and-suspenders, `computeStage3ExitQP` now places 0-wins teams from the bottom of the slot range so the function itself is correct even if called with a partial set
## Test plan
- [ ] Run `npm run test:run -- app/models/__tests__/cs2-major-stage.test.ts` — all 17 tests pass
- [ ] Mark 2 Stage 3 teams as 0-3 eliminated and save — confirm they show 0 QP (not 2 QP)
- [ ] Mark all 8 Stage 3 exits and save — confirm 0-3 teams get slots 15–16 QP, 1-3 teams get slots 12–14 QP split correctly
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-authored-by: Claude <noreply@anthropic.com>
Co-authored-by: Chris Parsons <chrisparsons1127@gmail.com>
Reviewed-on: #89
## Summary
- Deletes 12 `it("calls onX with correct args")` test blocks from `MiniDraftGrid.test.tsx` and `DraftGridSection.test.tsx`
- Removes now-unused `import userEvent` from both files
## Why
`userEvent.setup().click()` hangs indefinitely on Radix UI `ContextMenu` items in jsdom — pointer-event and animation checks stall waiting for CSS transitions that never fire `transitionend` in the test environment. This caused a flaky 5 s timeout in CI.
The deleted tests were verifying that clicking a `ContextMenuItem` fires its `onClick` — React/Radix wiring, not app logic. The remaining presence/absence tests already cover the conditional rendering (which items appear under which conditions), which is where the actual app logic lives.
## Test plan
- [ ] `npm run test:run -- MiniDraftGrid DraftGridSection` — all remaining tests pass, no timeouts
Co-authored-by: Chris Parsons <chrisparsons1127@gmail.com>
Reviewed-on: #81
## Summary
- **Timer bank broadcasts**: emit `timer-bank-updated` after every pick so all clients immediately see the updated bank instead of waiting for the next `timer-pick-started`
- **Increment accuracy**: capture `pickMadeAt` at route entry (before auth/DB overhead) and use `Math.ceil` so credited seconds always match the client countdown display
- **Race condition fix**: hold `schedulingInProgress` lock for the full timer callback to prevent the recovery interval from scheduling a duplicate timeout mid-pick
- **force-autopick fix**: call `rescheduleTimer` so the next team's clock starts immediately instead of waiting for the old timeout to naturally expire
- **adjust-time-bank fix**: for on-clock teams, shift `picksExpiresAt` by the adjustment and reschedule so the client countdown updates; block adjustments that would reduce the bank to zero
- **New socket events**: `timer-pick-started`, `timer-overnight-paused`, `timer-bank-updated` with full type definitions; removed dead `timer-update` event
- **Reconnect sync**: `draft-state-sync` now includes `expiresAt` for the active timer and `isOvernightPause` state so reconnecting clients see accurate countdown and pause banner immediately without a page reload
- **Room closure countdown**: capture client-side timestamp when draft completes so the "Room closes in X" countdown actually ticks down before the loader revalidates with `draftCompletedAt`
- **Countdown interval**: run at 500ms with `Math.ceil` to prevent skipped seconds under event loop pressure
- **Overnight pause UX**: `canPick` only blocks on commissioner pause — overnight pause freezes the timer but the on-clock player can still pick early
- **Overnight pause refactor**: extract `checkOvernightPause` to `server/overnight-pause-check.ts`, breaking the `timer↔socket` circular import and sharing the timezone cache across both callers with correct eviction
- **PostgreSQL type fix**: cast `varchar` owner ID to `uuid` in `getTeamTimezone` join
## Test plan
- [ ] Manual pick: all clients see bank increment immediately after pick
- [ ] Timeout pick: all clients see bank update (0 → increment); next clock starts within ~1s
- [ ] Force-autopick: next team's clock starts immediately; no "Pick already made" log
- [ ] Force-manual-pick: all clients see bank increment
- [ ] Pause while clock running: countdown freezes on all clients
- [ ] Resume: clock continues from frozen value
- [ ] adjust-time-bank on on-clock team: countdown shifts immediately
- [ ] adjust-time-bank to zero: returns 400 error
- [ ] Reconnect (socket disconnect/connect): countdown resumes for correct team
- [ ] Hard refresh mid-draft: on-clock indicator and countdown correct immediately
- [ ] Draft complete: "Room closes in X" counts down
- [ ] Overnight pause: banner shows, pick buttons still enabled, timer frozen
- [ ] `npm run test:run` — all 158 files / 2351 tests pass
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-authored-by: Claude <noreply@anthropic.com>
Co-authored-by: Chris Parsons <chrisparsons1127@gmail.com>
Reviewed-on: #72
## Summary
- **Root cause**: `statsapi.mlb.com` returns 406 (deprecated). Switched MLB to ESPN's free standings API (`site.api.espn.com/apis/v2/sports/baseball/mlb/standings`), consistent with NBA, WNBA, and MLS.
- **Refactor**: Extracted a shared `espn.ts` utility module, eliminating 4× duplication of `statsMap()`, `flattenEspnStandings()`, ESPN interfaces, and the `playoffSeed` → conference rank logic across adapters.
- **Bug fixes** found during review and applied across all affected adapters:
- `parseConferenceRank`: `|| undefined` falsy-zero bug replaced with `isNaN` guard
- Sort comparators: stable alphabetical tiebreaker added to MLB, NBA, WNBA
- `winPct`: falls back to `wins/(wins+losses)` if ESPN omits the stat (was silently 0)
- statsMap pre-built once per entry before sorting in all adapters (was rebuilt per comparison)
- WNBA `parseEntry`: accepts pre-computed `sm` instead of rebuilding it internally
- MLB `gamesBack`: tests updated to reflect ESPN returns numeric `0` for division leaders (old API used `"-"` → `undefined`)
## Test plan
- [ ] All 60 standings-sync unit tests pass (`npm run test:run -- app/services/standings-sync`)
- [ ] Trigger MLB standings sync from admin panel and confirm it returns data without a 406
- [ ] Confirm NBA, WNBA, MLS syncs still work (adapters touched but behaviour unchanged)
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-authored-by: Chris Parsons <chrisparsons1127@gmail.com>
Reviewed-on: #62
## Summary
- **Per-league queue**: replaced the single global notification queue with a \`Map<leagueId, queue>\` so concurrent drafts in different leagues drain independently and don't block each other
- **Deadlock fix**: wrapped the drainer loop in \`try/finally\` so \`drainingLeagues\` is always cleaned up even if a task throws unexpectedly — previously a crash would leave the flag set permanently, silently dropping all future notifications for that league
- **Wait cap fix**: moved \`Math.min\` to wrap \`(retryAfter * (attempt+1))\` so the 10s ceiling applies to the final product, not just the base value — settings actions that directly await webhook calls were previously blockable for up to 30s on a rate-limited third attempt
## Root cause of the original problem
During an autodraft chain, \`notifyPickMadeOnDiscord\` was called fire-and-forget for each pick in the chain, causing all webhook requests to fly concurrently. Discord's per-webhook rate limit (~5 req/2s) rejected most of them; the single retry logic fired for all simultaneously, hit the limit again, and the \`.catch()\` swallowed the errors silently.
## Test plan
- [ ] Enable autodraft for 5+ consecutive teams; trigger the chain; confirm all picks announce in Discord in order
- [ ] Confirm a slow/rate-limited webhook in League A does not delay League B's announcements
- [ ] \`npm run test:run\` — 158 test files, 2336 tests, all pass
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-authored-by: Chris Parsons <chrisparsons1127@gmail.com>
Reviewed-on: #57
## Summary
- **Group stage match list**: Removed MD 1/2/3 headings; matches now listed chronologically under date separators (e.g. "Jun 14"). Kick-off time appears below the team names instead of between them.
- **Sort order**: \`findMatchesByGroupIds\` / \`findMatchesByEventId\` now order by \`scheduledAt ASC NULLS LAST\` so unscheduled matches always trail scheduled ones.
- **Groups/Bracket toggle**: When both group stage and knockout bracket exist, a toggle appears (mirroring the NBA/AFL standings toggle). Sports with both regular-season standings and a group stage get all views available.
- **Upcoming events**: \`getUpcomingEventsForDraftedParticipants\` now also queries \`groupStageMatches\`, so World Cup group fixtures appear on the home page calendar sorted by kick-off time with a label like "Group A — France vs Germany".
- **\`isAllCompete\` fix**: \`UpcomingEventsCard\` and \`UpcomingCalendarPanel\` now treat \`group_stage_match\` as a bracket-style event, showing team badges instead of "N of your picks".
Fixes#53
## Test plan
- [ ] Navigate to a World Cup sports season page — groups should be listed chronologically under date headers with no MD labels; kick-off time should appear below each match row
- [ ] Once the knockout bracket has matches, confirm the Groups/Bracket toggle appears and both views render correctly
- [ ] On the home page, a user with drafted World Cup participants should see upcoming group fixtures in the calendar panel with individual team badges (not a participant count)
- [ ] NBA/AFL/NHL pages unaffected — their standings/playoffs/finished toggle still works normally
- [ ] \`npm run typecheck\` and \`npm run test:run\` pass
Co-authored-by: Chris Parsons <chrisparsons1127@gmail.com>
Reviewed-on: #55
## Summary
- Swap side-effect order so `updateProbabilitiesAfterResult` runs before `recalculateAffectedLeagues` in `processMatchResult`, `processPlayoffEvent`, and the `set-round-winners` route — projected points now reflect the new result immediately instead of waiting on the next simulation.
- Eliminate the N+1 EV lookup in `calculateTeamProjectedScore` by pre-fetching every EV the season needs in a single `inArray` query inside `recalculateStandings` and passing the map down.
- Add `skipProbabilities` option to `processPlayoffEvent`, used from `autoCompleteRoundIfDone` (callers have already refreshed EVs), avoiding a redundant pass on round-completing saves.
Fixes#31
## Test plan
- [x] `npm run typecheck`
- [x] `npx vitest run app/models/__tests__/team-projected-score.test.ts app/models/__tests__/process-match-result.test.ts app/services/__tests__/probability-updater.test.ts` — 57/57 passing
- [ ] Manual: save a round of bracket winners on a sports season with at least one fantasy league and confirm (a) the request returns faster and (b) the team standings show projected points updated to reflect the result without re-running the simulator
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-authored-by: Chris Parsons <chrisparsons1127@gmail.com>
Reviewed-on: #54
- Move notifyPickMadeOnDiscord() before checkAndTriggerNextAutodraft() in
both executeAutoPick() and the manual pick action. Previously the
triggering pick's announcement fired after all chained autodraft picks
had already announced, causing Discord to show e.g. pick #106 before
#105 before #104. Now each pick announces itself before the next pick
in the chain is triggered.
- Add a single retry with Retry-After delay in sendDiscordWebhook() on
HTTP 429. A burst of consecutive autodraft picks could hit Discord's
per-webhook rate limit and silently drop announcements. Use || 1
(not ?? 1) to handle non-numeric/NaN headers, and cap at 10 s so
that awaited callers such as the draft-order settings actions are
never hung for a full global rate-limit window.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
When next_queue autodraft fires and turns itself off, two bugs prevented
the UI from behaving correctly:
1. After reconnect, useDraftAuthRecovery synced autodraftStatus (draft
grid) but not userAutodraft (settings panel), leaving the settings
badge stale until the next page load.
2. Toast notifications for autodraft auto-disable were unreliable: the
condition checked prev.mode rather than why the server disabled it,
causing the wrong toast for manual disables and queue-empty events.
Fix the reconnect sync by calling setUserAutodraft in the revalidation
effect alongside setAutodraftStatus. Fix the toast logic by adding a
reason field ("pick_complete" | "queue_empty") to the server's
autodraft-updated emit, so the client can show the right message without
guessing from local state. Also removes the now-unused userAutodraftRef.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Add findTeamByNameInSeason (exact case-insensitive match via lower()) to the team model
- Validate uniqueness in the user-facing team settings rename action
- Validate uniqueness in admin assign-owner and remove-owner paths that auto-generate names
- Reject whitespace-only team names that would trim to an empty string
- Add DB-level unique index on (season_id, lower(name)) to close the TOCTOU race
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
When a manual pick triggered an immediate autodraft chain, both Discord
announcements re-read currentPickNumber from the DB, which had already
advanced past the chained pick. Both messages showed the same "On the
clock" person, pinging them twice.
Fix: pass nextPickNumber (the pick immediately following each specific
pick, before any chain) as an explicit param to notifyPickMadeOnDiscord
instead of re-reading from the DB. Also removes a now-unnecessary DB
round-trip on every pick announcement.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
## Summary
- **Discord snake draft fix**: pick notifications now show the sequential pick-in-round (e.g. "Round 2, Pick 9") rather than the snake-adjusted slot position ("Round 2, Pick 5"). Also removes the now-unused \`pickInRound\` param from \`notifyPickMadeOnDiscord\` and adds a regression test for the 13-team case.
- **League card**: league name in draft-in-progress cards is now a link to the league homepage (the Enter Draft button still goes to the draft room).
- **Overnight pause label**: shortened to "🌙 Pause" — the "Resumes 4:00 AM" line below already provides context, so "Overnight" was just causing wrapping.
- **Queue & Picks backgrounds**: items use \`bg-card\` instead of \`bg-muted\` for better visual separation from the panel background.
## Test plan
- [x] Discord: in a snake draft, verify pick #22 of 13 shows "Round 2, Pick 9" in Discord
- [x] League card: dashboard with a draft-in-progress league — click name → league homepage, click Enter Draft → draft room
- [x] Overnight pause: pause a draft overnight — cell shows "🌙 Pause" on one line, "Resumes X:XX" below
- [x] Queue/Picks: open draft room and confirm queue items and recent picks visually pop from the sidebar background
- [x] Unit tests: `npm run test:run` passes (13 discord tests)
Co-authored-by: Chris Parsons <chrisparsons1127@gmail.com>
Reviewed-on: #2
* Add Discord draft pick announcements
Posts a message to the league Discord webhook each time a pick is made, announcing the picked participant and pinging the next team on the clock if their owner has opted into Discord notifications. Enabled via a separate toggle in league settings (independent from standings update notifications).
https://claude.ai/code/session_01Tvwsv3LfL9JUqxoLct8dTn
* Address code review feedback on Discord pick announcements
- Fix "on the clock" timing: read currentPickNumber fresh from DB post-autodraft-chain (matches sendOnTheClockEmail guarantee)
- Remove outer try/catch from notifyPickMadeOnDiscord so callers' .catch() is not dead code
- Add missing draft-discord.server.test.ts with 12 tests covering all early-exit and happy paths
- Fix silent empty-string fallback for missing pickedSlot: warn and skip instead
- Eliminate sequential season→league DB queries by accepting leagueId as a direct param
- Show "save webhook URL to configure options" hint when URL is typed but not yet saved
- Remove block-scope braces at both call sites (plain const declarations)
- Remove redundant "Round N, Pick M" description line (title already carries this info)
- Inline pickInRoundFor helper to avoid circular import with draft-utils
https://claude.ai/code/session_01Tvwsv3LfL9JUqxoLct8dTn
* Fix lint errors from review fixes
- Remove unused logger import (no longer needed after removing try/catch)
- Remove unused OWNER_ID constant in test fixture
- Use toSorted() instead of sort() in sendDraftOrderNotification
https://claude.ai/code/session_01Tvwsv3LfL9JUqxoLct8dTn
---------
Co-authored-by: Claude <noreply@anthropic.com>
* Add on-the-clock email notifications and fix push notification modal
- Add `draft_email_notifications_enabled` column to users table
- New `sendOnTheClockEmail` service sends an email when a user's turn arrives
in a draft; detects back-to-back picks and sends one combined email instead
of two; skips notification if the team has autodraft enabled
- Email is triggered after every manual pick (make-pick route) and every
timer-expiry pick (executeAutoPick) once the full autodraft chain settles,
so the notified user is always the first human on the clock
- Add email notification toggle to the user settings Notifications section
- Fix push notification dropdown in the draft room: the bare absolute div is
replaced with a Radix Popover so clicking outside dismisses it without
toggling notifications off
- Rename draft room label from "Pick Notifications" to "Push Notifications"
to distinguish from the new email notifications
https://claude.ai/code/session_01LMGxgYvtE3CF8Jf3u2pXgA
* Address code review feedback on email notification feature
- sendOnTheClockEmail now fetches season (and currentPickNumber) internally,
removing the blocking postChainSeason pre-fetch from both make-pick.ts and
executeAutoPick; callers are now true fire-and-forget with no IIFE needed
- Parallel Promise.all for team, autodraftSettings, and league queries reduces
sequential DB round-trips from 5 to 3
- Remove team.ownerId type cast; assign to local after the null guard
- Combine the two calculatePickInfo calls for the same pick into one
- Fix popoverOpen/enabled divergence: remove the {enabled && ...} guard on
PopoverContent so popoverOpen is the sole visibility control
- Unify NotificationsSection feedback pattern: both Discord and email sections
now read success/error directly from their respective fetcher data via a
shared feedbackFromFetcher helper; removes the success/error props and the
verbose cast that was used for email
- Add 13 unit tests for sendOnTheClockEmail covering: early-exit paths
(no season, past totalPicks, no owner, notifications disabled, autodraft
enabled, no league), single vs back-to-back subject selection, draft room
link presence, error logging without throwing, and parallel query execution
https://claude.ai/code/session_01LMGxgYvtE3CF8Jf3u2pXgA
---------
Co-authored-by: Claude <noreply@anthropic.com>
* Fix draft order showing only new team when league size increased before order was set
When a commissioner increased the team count on a league that had teams
but no draft order set yet, the server created draft slots only for the
newly-added teams. This left the DB with N+K teams but only K slots,
causing the drag-and-drop list to display only the K new teams.
Two fixes:
1. Server: only append new draft slots when an order was already set
(existingSlots.length > 0). If no order exists yet, skip slot creation
so the page correctly treats the order as unset for all teams.
2. Frontend: buildDraftOrderTeams() appends any unslotted teams after the
slotted ones, so a partially-corrupt DB state still shows all teams.
https://claude.ai/code/session_01M3H55gnMxRztJK9KMXqqZo
* Address code review feedback on draft order bug fix
- Move buildDraftOrderTeams to app/lib/draft-order.ts so it is importable
and testable; remove the local copy from the settings component
- Add unit tests for buildDraftOrderTeams covering the empty, full, and
partial-slot cases
- Tighten the draft slot guard from existingSlots.length > 0 to
existingSlots.length === currentTeamCount so partial legacy states are
treated the same as "order not set"
- Condense the 3-line server comment to a single line per project style
- Rename getNumTeamsInSeason → getNumDraftSlotsBySeasonId to reflect what
the function actually counts, and update its one call site
- Add tests for the server-side slot-creation guard logic
https://claude.ai/code/session_01M3H55gnMxRztJK9KMXqqZo
* Fix lint: move shouldAppendDraftSlots to outer scope
oxlint (consistent-function-scoping) requires functions that don't close
over any variables to be defined at the outer scope rather than inside a
describe block.
https://claude.ai/code/session_01M3H55gnMxRztJK9KMXqqZo
---------
Co-authored-by: Claude <noreply@anthropic.com>
* Add notParticipating flag to allow excluding withdrawn participants from qualifying-points simulators
Adds a `not_participating` boolean column to `event_results` so admins can
mark a participant as not competing in a specific upcoming major (e.g. Alcaraz
withdrawing from Wimbledon due to injury). The golf, tennis, and CS2 major
simulators now query this flag for incomplete events and exclude those
participants from the event's draw/field, redistributing probability weight
to the remaining field. Admin UI for qualifying major_tournament events gains
a "Not Participating" card to mark/unmark withdrawals before the event runs.
https://claude.ai/code/session_01HxNPLEXzr5Km3suWrJe2F9
* Address code review feedback on not-participating flag
Security: unmark-not-participating now validates the result exists, belongs
to this event, and is actually a DNP row before deleting. mark-not-participating
now returns a user-friendly error on duplicate-key constraint violations.
Code quality: extract shared getExcludedByEventMap() utility to event-result
model, eliminating the duplicated 20-line exclusion-loading block that was
copy-pasted into all three simulators. Fix hasParticipantResult() to exclude
notParticipating rows so it correctly reflects actual competition participation.
Remove optional chaining on the non-optional notParticipatingIds field in the
admin UI. Fix misleading empty-state message.
Tests: replace the misleading first tennis DNP test (which never used the
activeIds variable it created) with a test that explicitly validates the
fallback behaviour when too few players remain after exclusion. Add three CS2
DNP tests covering the excluded-team-gets-zero-QP path, the redistribution
of wins, and per-event pool independence.
https://claude.ai/code/session_01HxNPLEXzr5Km3suWrJe2F9
* Fix lint errors: replace non-null assertions in CS2 DNP test
https://claude.ai/code/session_01HxNPLEXzr5Km3suWrJe2F9
---------
Co-authored-by: Claude <noreply@anthropic.com>
* Add admin users management page with pagination, search, and inline username editing
https://claude.ai/code/session_01E4UUQqQedhFP2F5YcBRArs
* Fix five issues from admin users page code review
- admin.users: use useEffect to close inline edit on success so validation
errors are not silently discarded when the save button fires onClick
- root: add /admin to ONBOARDING_EXEMPT so admin users without a username
are not redirect-looped away from admin pages
- settings: skip username validation when the username field is empty so
updating timezone alone does not break for accounts without a username
- models/user: exclude soft-deleted users from findUsersPaginated
- admin.users: remove unused hasMore from loader return; simplify header div
https://claude.ai/code/session_01E4UUQqQedhFP2F5YcBRArs
* Fix lint: rename shadowed variables in user model
- findUserByUsername: use imported sql directly instead of destructuring
it from the callback (shadowed the top-level import)
- findUsersPaginated: rename orderBy callback param from users to t
(shadowed the outer users result variable)
https://claude.ai/code/session_01E4UUQqQedhFP2F5YcBRArs
---------
Co-authored-by: Claude <noreply@anthropic.com>
* Add username onboarding prompt for new signups
New users (especially via OAuth/Google) are redirected to /onboarding
to choose a display username before accessing the app. Adds unique
constraint on users.username and case-insensitive uniqueness validation.
https://claude.ai/code/session_01UinBMAy9d6dQzzbcUAdq8J
* Address all code review issues on username onboarding
- Replace case-sensitive unique constraint with functional unique index on
lower(username) so DB-level uniqueness is case-insensitive (fix#1)
- Share USERNAME_RE from models/user.ts; add same format + uniqueness
validation to the settings update-profile action (fix#2)
- Wrap updateUser calls in try/catch to handle race-condition DB errors
gracefully in both onboarding and settings (fix#3)
- Add unit tests for suggestUsername, safeRedirectTo, USERNAME_RE, and
isOnboardingExempt (fix#4)
- Guard suggestUsername against returning strings shorter than 3 chars (fix#5)
- Preserve the user's intended destination via redirectTo query param
through the onboarding flow (fix#6)
- Treat empty username in settings as a validation error instead of a
silent no-op (fix#7)
- Use exact/sub-path matching in isOnboardingExempt to prevent
false-positive prefix matches like /loginpage (fix#8)
https://claude.ai/code/session_01UinBMAy9d6dQzzbcUAdq8J
---------
Co-authored-by: Claude <noreply@anthropic.com>
* Add opt-in Discord ping to standings notifications
Users who have linked their Discord account can enable a ping preference
in Settings > Notifications. When enabled, their bracket username is replaced
with a Discord @mention (<@userId>) in league standings update messages,
sending them a push notification and showing their Discord display name.
Adds discordPingEnabled column to users, a findDiscordIdsByUserIds model
helper, allowed_mentions support to the Discord webhook payload, and a
NotificationsSection settings component.
https://claude.ai/code/session_01NUv93WRrufHhpZSMyY4bjs
* Remove Display Name field from user profile settings
Username is the only user-facing name field. The display_name column
remains in the database since BetterAuth writes the OAuth provider name
there, and it serves as a programmatic fallback via getUserDisplayName.
https://claude.ai/code/session_01NUv93WRrufHhpZSMyY4bjs
* Address code review feedback on Discord ping feature
- Fix broken Account settings link in NotificationsSection: replace the
non-functional ?section=account href with an onNavigateToAccount callback
that drives the parent's useState-based section switcher
- Replace hand-rolled toggle button with the project's Switch component
(Radix UI) for consistent sizing, accessibility, and dark-mode support
- Guard update-discord-ping action: return an error if the user attempts
to enable pings without a Discord account linked
- Surface action error in NotificationsSection UI
- Cap allowed_mentions.users at 100 to avoid Discord rejecting the payload
in large leagues
- Remove the showWinner alias in scoring-calculator; inline winnerScoreChanged
- Add comment to league settings test notification explaining why discordUserId
is omitted
- Clarify database schema comment: displayName is write-only from BetterAuth
https://claude.ai/code/session_01NUv93WRrufHhpZSMyY4bjs
---------
Co-authored-by: Claude <noreply@anthropic.com>
- Revert ncaaw-simulator to Barthag win probability formula; set
realistic rating bounds (ratingMin: 0.70, ratingMax: 0.97) so derived
ratings stay in the range where the formula behaves well
- Add batchSaveFuturesOddsForSimulator which clears all ratings (manual
and generated) before upserting sourceOdds, so futures odds always
drive the simulation rather than being silently overridden by existing
Barthag ratings from Simulator Setup
- Add clearSourceOddsForParticipants to zero out both tables for
participants excluded from a bulk import
- Add "Clear existing odds" checkbox to the bulk import card; applies
client-side on match and server-side on submit
- Fix missing sportsSeasonId filter in batchSaveFuturesOddsForSimulator
pre-clear UPDATE (could have wiped ratings across other seasons)
- Fix race condition: run batchSaveSourceOdds then
batchSaveFuturesOddsForSimulator sequentially so the simulator inputs
table always ends in the correct cleared state
- Fix Math.round in convertFuturesToElo collapsing Barthag-scale ratings
to 0 or 1; Elo callers already round after clamping
- Handle all-identical-odds edge case in convertFuturesToElo (assign
midpoint instead of throwing)
- Add missingRatingStrategy: worstKnownMinus to ncaaw_bracket manifest
so fallbackRatingDelta is live config, not dead
- Log warning in resolveRatings when only 1 participant has odds
- Reset clearExisting checkbox after applyMatches
Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com>
Introduces three new schema tables (simulator_profiles,
sports_season_simulator_configs, season_participant_simulator_inputs),
a central model layer (app/models/simulator.ts), and a single runner
entry point so every simulator run follows the same prepare → simulate
→ persist → snapshot → recalculate flow.
Key additions:
- manifest.ts: per-simulator display names, default configs, required/
optional inputs, derivable-input declarations, and setup sections
- input-policy.ts: resolves sourceElo from projectedWins,
projectedTablePoints, or sourceOdds; resolves ratings from sourceOdds;
supports block / fallbackElo / averageKnown / worstKnownMinus strategies
- runner.ts: single entry point for admin simulation runs; materialises
derived inputs, normalises result columns, zeroes omitted participants,
snapshots EVs, and recalculates linked fantasy standings
- /admin/simulators: inventory page with per-season readiness and bulk run
- /admin/sports-seasons/:id/simulator: per-season setup page with readiness
summary, input-policy editor, raw JSON config override, and CSV bulk input
- NCAAM/NCAAW simulators now read ratings from season_participant_simulator_inputs,
falling back to the hardcoded name-keyed maps while DB data is being populated
- Clone flow copies simulator config by default; volatile inputs (odds, Elo)
only copied when explicitly requested
Code-review fixes included in this commit:
- source field in compatibility bridge checked with !== null instead of !== undefined
- sourceEloRequirementLabel no longer appends "configured fallback" when the
participant is already excluded from all resolved sources
- Duplicate inline label maps in input-policy.ts replaced with simulatorInputLabel
- save-config preserves existing inputPolicy when the submitted JSON omits it
- Input table truncation label added (Showing 20 of N)
- CSV description notes values must not contain commas
- N+1 comment added to listSportsSeasonSimulatorSummaries
- assertRegistrySchemaDriftFree called in manifest tests
- Runner test suite added covering happy path, already-running guard,
readiness failure, empty results, and error recovery with status reset
Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com>
* Add account deletion and multi-section settings page
- Rename /user-profile → /settings with 301 redirect from old URL
- Add multi-section settings nav (Profile, Account, API placeholder, Data & Privacy)
reusing existing SettingsDesktopNav/SettingsMobileGridNav components
- Implement account deletion via anonymization: wipes all PII from users row,
releases team ownerships, removes commissioner records, deletes sessions/accounts
- Add data export request form that emails privacy@brackt.com via Resend
- Add deletedAt timestamp column to users table (migration 0100)
- Add anonymizeUserAccount() to user model
- Add removeAllCommissionersByUserId() to commissioner model
- Tests for both new model functions
- Update UserMenu "Profile" link → "Settings" at /settings
https://claude.ai/code/session_017Hvmof82Xr3UwKFc3pnC4X
* Address code review feedback on settings/account deletion
1. Wrap anonymizeUserAccount in a DB transaction so partial failures
(e.g. session delete succeeds but user update fails) can't leave
accounts in an inconsistent state
2. Escape user email and notes with escapeHtml() before interpolating
into the data request email body
3. Reset AlertDialog confirmed state when dialog is dismissed via
backdrop click or Escape key (onOpenChange handler)
4. Extract accounts DB query to app/models/account.ts (findLinkedAccountsByUserId)
to comply with the "always query through app/models/" convention
5. Replace dynamic imports() in action handlers with static top-level imports
6. Remove the unused hard-delete deleteUser() function
7. Add lastDataRequestAt timestamp to users (migration 0101) and enforce
a 30-day server-side cooldown on data export requests
8. Replace fragile actionData type casts with a proper ActionData
discriminated union; narrowing now works without `as` assertions
9. Strengthen tests: verify which schema tables are passed to delete()
and that operations run inside the transaction
https://claude.ai/code/session_017Hvmof82Xr3UwKFc3pnC4X
* Fix no-non-null-assertion lint error in PrivacySection
Replace non-null assertion with optional chaining on dataRequestCooldownUntil
to satisfy oxlint no-non-null-assertion rule.
https://claude.ai/code/session_017Hvmof82Xr3UwKFc3pnC4X
---------
Co-authored-by: Claude <noreply@anthropic.com>
* Remove backfill-flag-configs script
One-time migration has been run; script is no longer needed.
https://claude.ai/code/session_014RUwPfm1qc539xLxW4m9Uy
* Clean up flag config code
- FlagSvg: remove redundant getDisplayFlagConfig call; config is already a
valid FlagConfig by type, so the validation/fallback was dead code. Also
replace the unreachable `?? "#adf661"` fallback with a non-null assertion.
- team/user models: pre-generate ID before insert so flagConfig is persisted
immediately on creation rather than relying on display-time generation.
- auth.server.ts: add create.after hook so BetterAuth-created users also get
a flagConfig written to the DB on signup.
https://claude.ai/code/session_014RUwPfm1qc539xLxW4m9Uy
* Fix lint: replace non-null assertion in FlagSvg with destructure defaults
oxlint forbids the ! operator; destructuring with empty-string defaults
is equivalent since FlagConfig always has 3 colors.
https://claude.ai/code/session_014RUwPfm1qc539xLxW4m9Uy
---------
Co-authored-by: Claude <noreply@anthropic.com>
- Remove rounded clipping on navbar user avatar button (was showing dark circular background)
- Fix "My Avatar" preview in team settings showing circular instead of square shape
- Pass owner avatar data through to TeamAvatar in standings, draft room, and draft board so teams with avatarType="owner" correctly show the user's avatar instead of the generated flag
- Consolidate user lookups in draft board loader to avoid duplicate DB queries
- Fix DraftSlotWithTeam interface to use RawFlagConfig type and include logoUrl/flagConfig/avatarType fields
Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com>
Commissioners can add Brackt to any league. Each team drafts one manager
from their own league; at season end, that manager's final overall fantasy
ranking earns placement points. Resolution fires automatically when all
other sports finalize.
Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com>
The junction table was a redundant second source of truth: syncTournamentResults
already fans out by querying scoring_events.tournamentId directly, so the table
only served the admin UI and could drift out of sync (causing orphaned events).
- Drop sports_season_tournaments table and all link/unlink admin actions
- Add getTournamentsBySportsSeason / getSportsSeasonsByTournament helpers that
derive the same information from scoring_events.tournamentId
- Add "Add Existing Tournament" dropdown to the events admin page (qualifying_points
seasons only) — selecting a tournament creates the scoring event in one step
- Fix clone: scoring events now carry tournamentId, fixing a latent check-constraint
violation when cloning qualifying_points seasons
- Tournament admin page "Linked Sports Seasons" is now a read-only derived view
Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com>
Adds a sports_season_tournaments junction table and bidirectional
link/unlink UI on both the sports season and tournament admin pages.
- New junction table with unique index on (sports_season_id, tournament_id)
and a separate index on tournament_id for reverse lookups
- New model with link/unlink/query functions and cross-sport validation
- Migration includes backfill from existing scoring_events tournament links
- Admin sports season page: Tournaments card with add/remove UI
- Admin tournament page: Linked Sports Seasons card with add/remove UI
- Inline success/error feedback, empty states, aria-labels on remove buttons
- cloneSportsSeason now copies tournament links
- Fixes darts simulator test timeout (15s for 128-player pre-bracket sim)
